Top 10 emerging technologies of 2015
Technology is perhaps the greatest agent of change in the modern world. While never without risk, technological breakthroughs promise innovative solutions to the most pressing global challenges of our time. From zero-emission cars fueled by hydrogen to computer chips modeled on the human brain, this year’s 10 emerging technologies offer a vivid glimpse of the power of innovation to improve lives, transform industries and safeguard our planet.
To compile this list, the World Economic Forum’s Meta-Council on Emerging Technologies, a panel of 18 experts, draws on the collective expertise of the Forum’s communities to identify the most important recent technological trends. By doing so, the Meta-Council aims to raise awareness of their potential and contribute to closing the gaps in investment, regulation and public understanding that so often thwart progress.
Image Source: http://www.blurgroup.com
The 2015 list is:
3. Recyclable thermoset plastics
4. Precise genetic engineering techniques
6. Emergent artificial intelligence
1. Fuel cell vehicles
Zero-emission cars that run on hydrogen
“Fuel cell” vehicles have been long promised, as they potentially offer several major advantages over electric and hydrocarbon-powered vehicles. However, the technology has only now begun to reach the stage where automotive companies are planning to launch them for consumers. Initial prices are likely to be in the range of $70,000, but should come down significantly as volumes increase within the next couple of years.
Unlike batteries, which must be charged from an external source, fuel cells generate electricity directly, using fuels such as hydrogen or natural gas. In practice, fuel cells and batteries are combined, with the fuel cell generating electricity and the batteries storing this energy until demanded by the motors that drive the vehicle. Fuel cell vehicles are therefore hybrids, and will likely also deploy regenerative braking – a key capability for maximizing efficiency and range.
Unlike battery-powered electric vehicles, fuel cell vehicles behave as any conventionally fueled vehicle. With a long cruising range – up to 650 km per tank (the fuel is usually compressed hydrogen gas) – a hydrogen fuel refill only takes about three minutes. Hydrogen is clean-burning, producing only water vapor as waste, so fuel cell vehicles burning hydrogen will be zero-emission, an important factor given the need to reduce air pollution.
There are a number of ways to produce hydrogen without generating carbon emissions. Most obviously, renewable sources of electricity from wind and solar sources can be used to electrolyse water – though the overall energy efficiency of this process is likely to be quite low. Hydrogen can also be split from water in high-temperature nuclear reactors or generated from fossil fuels such as coal or natural gas, with the resulting CO2 captured and sequestered rather than released into the atmosphere.
As well as the production of cheap hydrogen on a large scale, a significant challenge is the lack of a hydrogen distribution infrastructure that would be needed to parallel and eventually replace petrol and diesel filling stations. Long distance transport of hydrogen, even in a compressed state, is not considered economically feasible today. However, innovative hydrogen storage techniques, such as organic liquid carriers that do not require high-pressure storage, will soon lower the cost of long-distance transport and ease the risks associated with gas storage and inadvertent release.
Mass-market fuel cell vehicles are an attractive prospect, because they will offer the range and fueling convenience of today’s diesel and petrol-powered vehicles while providing the benefits of sustainability in personal transportation. Achieving these benefits will, however, require the reliable and economical production of hydrogen from entirely low-carbon sources, and its distribution to a growing fleet of vehicles (expected to number in the many millions within a decade).
2. Next-generation robotics
Rolling away from the production line
The popular imagination has long foreseen a world where robots take over all manner of everyday tasks.
This robotic future has stubbornly refused to materialize, however, with robots still limited to factory assembly lines and other controlled tasks. Although heavily used (in the automotive industry, for instance) these robots are large and dangerous to human co-workers; they have to be separated by safety cages.
Advances in robotics technology are making human-machine collaboration an everyday reality. Better and cheaper sensors make a robot more able to understand and respond to its environment. Robot bodies are becoming more adaptive and flexible, with designers taking inspiration from the extraordinary flexibility and dexterity of complex biological structures, such as the human hand. And robots are becoming more connected, benefiting from the cloud-computing revolution by being able to access instructions and information remotely, rather than having to be programmed as a fully autonomous unit.
The new age of robotics takes these machines away from the big manufacturing assembly lines, and into a wide variety of tasks. Using GPS technology, just like smartphones, robots are beginning to be used in precision agriculture for weed control and harvesting. In Japan, robots are being trialed in nursing roles: they help patients out of bed and support stroke victims in regaining control of their limbs. Smaller and more dexterous robots, such as Dexter Bot, Baxter and LBR iiwa, are designed to be easily programmable and to handle manufacturing tasks that are laborious or uncomfortable for human workers.
Indeed, robots are ideal for tasks that are too repetitive or dangerous for humans to undertake, and can work 24 hours a day at a lower cost than human workers. In reality, new-generation robotic machines are likely to collaborate with humans rather than replace them. Even considering advances in design and artificial intelligence, human involvement and oversight will remain essential.
There remains the risk that robots may displace human workers from jobs, although previous generations of automation have tended to lead to higher productivity and growth with benefits throughout the economy. Decades-old fears of networked robots running out of control may become more salient with next generation robotics linked into the web – but more likely familiarization as people employ domestic robots to do household chores will reduce fears rather than fan them. And new research into social robots – that know how to collaborate and build working alliances with humans – means that a future where robots and humans work together, each to do what it does best – is a strong likelihood. Nevertheless, however, the next generation of robotics poses novel questions for fields from philosophy to anthropology about the human relationship to machines.
3. Recyclable thermoset plastics
A new kind of plastic to cut landfill waste
Plastics are divided into thermoplastics and thermoset plastics. The former can be heated and shaped many times, and are ubiquitous in the modern world, comprising everything from children’s toys to lavatory seats. Because they can be melted down and reshaped, thermoplastics are generally recyclable. Thermoset plastics however can only be heated and shaped once, after which molecular changes mean that they are “cured”, retaining their shape and strength even when subject to intense heat and pressure.
Due to this durability, thermoset plastics are a vital part of our modern world, and are used in everything from mobile phones and circuit boards to the aerospace industry. But the same characteristics that have made them essential in modern manufacturing also make them impossible to recycle. As a result, most thermoset polymers end up as landfill. Given the ultimate objective of sustainability, there has long been a pressing need for recyclability in thermoset plastics.
In 2014 critical advances were made in this area, with the publication of a landmark paper in the journal Science announcing the discovery of new classes of thermosetting polymers that are recyclable. Called poly(hexahydrotriazine)s, or PHTs, these can be dissolved in strong acid, breaking apart the polymer chains into component monomers that can then be reassembled into new products. Like traditional unrecyclable thermosets, these new structures are rigid, resistant to heat and tough, with the same potential applications as their unrecyclable forerunners.
Although no recycling is 100% efficient, this innovation – if widely deployed – should speed up the move towards a circular economy with a big reduction in landfill waste from plastics. We expect recyclable thermoset polymers to replace unrecyclable thermosets within five years, and to be ubiquitous in newly manufactured goods by 2025.
4. Precise genetic-engineering techniques
A breakthrough offers better crops with less controversy
Conventional genetic engineering has long caused controversy. However, new techniques are emerging that allow us to directly “edit” the genetic code of plants to make them, for example, more nutritious or better able to cope with a changing climate.
Currently, the genetic engineering of crops relies on the bacterium agrobacterium tumefaciens to transfer desired DNA into the target genome. The technique is proven and reliable, and despite widespread public fears, there is a consensus in the scientific community that genetically modifying organisms using this technique is no more risky than modifying them using conventional breeding. However, whileagrobacterium is useful, more precise and varied genome-editing techniques have been developed in recent years.
These include ZFNs, TALENS and, more recently, the CRISPR-Cas9 system, which evolved in bacteria as a defense mechanism against viruses. CRISPR-Cas9 system uses an RNA molecule to target DNA, cutting to a known, user-selected sequence in the target genome. This can disable an unwanted gene or modify it in a way that is functionally indistinguishable from a natural mutation. Using “homologous recombination”, CRISPR can also be used to insert new DNA sequences, or even whole genes, into the genome in a precise way.
Another aspect of genetic engineering that appears poised for a major advance is the use of RNA interference (RNAi) in crops. RNAi is effective against viruses and fungal pathogens, and can also protect plants against insect pests, reducing the need for chemical pesticides. Viral genes have been used to protect papaya plants against the ringspot virus, for example, with no sign of resistance evolving in over a decade of use in Hawaii. RNAi may also benefit major staple-food crops, protecting wheat against stem rust, rice against blast, potato against blight and banana against fusarium wilt.
Many of these innovations will be particularly beneficial to smaller farmers in developing countries. As such, genetic engineering may become less controversial, as people recognize its effectiveness at boosting the incomes and improving the diets of millions of people. In addition, more precise genome editing may allay public fears, especially if the resulting plant or animal is not considered transgenic because no foreign genetic material is introduced.
Taken together, these techniques promise to advance agricultural sustainability by reducing input use in multiple areas, from water and land to fertilizer, while also helping crops to adapt to climate change.
5. Additive manufacturing
The future of making things, from printable organs to intelligent clothes
As the name suggests, additive manufacturing is the opposite of subtractive manufacturing. The latter is how manufacturing has traditionally been done: starting with a larger piece of material (wood, metal, stone, etc), layers are removed, or subtracted, to leave the desired shape. Additive manufacturing instead starts with loose material, either liquid or powder, and then builds it into a three-dimensional shape using a digital template.
3D products can be highly customized to the end user, unlike mass-produced manufactured goods. An example is the company Invisalign, which uses computer imaging of customers’ teeth to make near-invisible braces tailored to their mouths. Other medical applications are taking 3D printing in a more biological direction: by directly printing human cells, it is now possible to create living tissues that may find potential application in drug safety screening and, ultimately, tissue repair and regeneration. An early example of this bioprinting is Organovo’s printed liver-cell layers, which are aimed at drug testing, and may eventually be used to create transplant organs. Bioprinting has already been used to generate skin and bone, as well as heart and vascular tissue, which offer huge potential in future personalized medicine.
An important next stage in additive manufacturing would be the 3D printing of integrated electronic components, such as circuit boards. Nano-scale computer parts, like processors, are difficult to manufacture this way because of the challenges of combining electronic components with others made from multiple different materials. 4D printing now promises to bring in a new generation of products that can alter themselves in response to environmental changes, such as heat and humidity. This could be useful in clothes or footwear, for example, as well as in healthcare products, such as implants designed to change in the human body.
Like distributed manufacturing, additive manufacturing is potentially highly disruptive to conventional processes and supply chains. But it remains a nascent technology today, with applications mainly in the automotive, aerospace and medical sectors. Rapid growth is expected over the next decade as more opportunities emerge and innovation in this technology brings it closer to the mass market.
6. Emergent artificial intelligence
What happens when a computer can learn on the job?
Artificial intelligence (AI) is, in simple terms, the science of doing by computer the things that people can do. Over recent years, AI has advanced significantly: most of us now use smartphones that can recognize human speech, or have travelled through an airport immigration queue using image-recognition technology. Self-driving cars and automated flying drones are now in the testing stage before anticipated widespread use, while for certain learning and memory tasks, machines now outperform humans. Watson, an artificially intelligent computer system, beat the best human candidates at the quiz game Jeopardy.
Artificial intelligence, in contrast to normal hardware and software, enables a machine to perceive and respond to its changing environment. Emergent AI takes this a step further, with progress arising from machines that learn automatically by assimilating large volumes of information. An example is NELL, the Never-Ending Language Learning project from Carnegie Mellon University, a computer system that not only reads facts by crawling through hundreds of millions of web pages, but attempts to improve its reading and understanding competence in the process in order to perform better in the future.
Like next-generation robotics, improved AI will lead to significant productivity advances as machines take over – and even perform better – at certain tasks than humans. There is substantial evidence that self-driving cars will reduce collisions, and resulting deaths and injuries, from road transport, as machines avoid human errors, lapses in concentration and defects in sight, among other problems. Intelligent machines, having faster access to a much larger store of information, and able to respond without human emotional biases, might also perform better than medical professionals in diagnosing diseases. The Watson system is now being deployed in oncology to assist in diagnosis and personalized, evidence-based treatment options for cancer patients.
Long the stuff of dystopian sci-fi nightmares, AI clearly comes with risks – the most obvious being that super-intelligent machines might one day overcome and enslave humans. This risk, while still decades away, is taken increasingly seriously by experts, many of whom signed an open letter coordinated by the Future of Life Institute in January 2015 to direct the future of AI away from potential pitfalls. More prosaically, economic changes prompted by intelligent computers replacing human workers may exacerbate social inequalities and threaten existing jobs. For example, automated drones may replace most human delivery drivers, and self-driven short-hire vehicles could make taxis increasingly redundant.
On the other hand, emergent AI may make attributes that are still exclusively human – creativity, emotions, interpersonal relationships – more clearly valued. As machines grow in human intelligence, this technology will increasingly challenge our view of what it means to be human, as well as the risks and benefits posed by the rapidly closing gap between man and machine.
7. Distributed manufacturing
The factory of the future is online – and on your doorstep
Distributed manufacturing turns on its head the way we make and distribute products. In traditional manufacturing, raw materials are brought together, assembled and fabricated in large centralized factories into identical finished products that are then distributed to the customer. In distributed manufacturing, the raw materials and methods of fabrication are decentralized, and the final product is manufactured very close to the final customer.
In essence, the idea of distributed manufacturing is to replace as much of the material supply chain as possible with digital information. To manufacture a chair, for example, rather than sourcing wood and fabricating it into chairs in a central factory, digital plans for cutting the parts of a chair can be distributed to local manufacturing hubs using computerized cutting tools known as CNC routers. Parts can then be assembled by the consumer or by local fabrication workshops that can turn them into finished products. One company already using this model is the US furniture company AtFAB.
Current uses of distributed manufacturing rely heavily on the DIY “maker movement”, in which enthusiasts use their own local 3D printers and make products out of local materials. There are elements of open-source thinking here, in that consumers can customize products to their own needs and preferences. Instead of being centrally driven, the creative design element can be more crowdsourced; products may take on an evolutionary character as more people get involved in visualizing and producing them.
Distributed manufacturing is expected to enable a more efficient use of resources, with less wasted capacity in centralized factories. It also lowers the barriers to market entry by reducing the amount of capital required to build the first prototypes and products. Importantly, it should reduce the overall environmental impact of manufacturing: digital information is shipped over the web rather than physical products over roads or rails, or on ships; and raw materials are sourced locally, further reducing the amount of energy required for transportation.
If it becomes more widespread, distributed manufacturing will disrupt traditional labour markets and the economics of traditional manufacturing. It does pose risks: it may be more difficult to regulate and control remotely manufactured medical devices, for example, while products such as weapons may be illegal or dangerous. Not everything can be made via distributed manufacturing, and traditional manufacturing and supply chains will still have to be maintained for many of the most important and complex consumer goods.
Distributed manufacturing may encourage broader diversity in objects that are today standardized, such as smartphones and automobiles. Scale is no object: one UK company, Facit Homes, uses personalized designs and 3D printing to create customized houses to suit the consumer. Product features will evolve to serve different markets and geographies, and there will be a rapid proliferation of goods and services to regions of the world not currently well served by traditional manufacturing.
8. ‘Sense and avoid’ drones
Flying robots to check power lines or deliver emergency aid
Unmanned aerial vehicles, or drones, have become an important and controversial part of military capacity in recent years. They are also used in agriculture, for filming and multiple other applications that require cheap and extensive aerial surveillance. But so far all these drones have had human pilots; the difference is that their pilots are on the ground and fly the aircraft remotely.
The next step with drone technology is to develop machines that fly themselves, opening them up to a wider range of applications. For this to happen, drones must be able to sense and respond to their local environment, altering their height and flying trajectory in order to avoid colliding with other objects in their path. In nature, birds, fish and insects can all congregate in swarms, each animal responding to its neighbour almost instantaneously to allow the swarm to fly or swim as a single unit. Drones can emulate this.
With reliable autonomy and collision avoidance, drones can begin to take on tasks too dangerous or remote for humans to carry out: checking electric power lines, for example, or delivering medical supplies in an emergency. Drone delivery machines will be able to find the best route to their destination, and take into account other flying vehicles and obstacles. In agriculture, autonomous drones can collect and process vast amounts of visual data from the air, allowing precise and efficient use of inputs such as fertilizer and irrigation.
In January 2014, Intel and Ascending Technologies showcased prototype multi-copter drones that could navigate an on-stage obstacle course and automatically avoid people who walked into their path. The machines use Intel’s RealSense camera module, which weighs just 8g and is less than 4mm thick. This level of collision avoidance will usher in a future of shared airspace, with many drones flying in proximity to humans and operating in and near the built environment to perform a multitude of tasks. Drones are essentially robots operating in three, rather than two, dimensions; advances in next-generation robotics technology will accelerate this trend.
Flying vehicles will never be risk-free, whether operated by humans or as intelligent machines. For widespread adoption, sense and avoid drones must be able to operate reliably in the most difficult conditions: at night, in blizzards or dust storms. Unlike our current digital mobile devices (which are actually immobile, since we have to carry them around), drones will be transformational as they are self-mobile and have the capacity of flying in the three-dimensional world that is beyond our direct human reach. Once ubiquitous, they will vastly expand our presence, productivity and human experience.
9. Neuromorphic technology
Computer chips that mimic the human brain
Even today’s best supercomputers cannot rival the sophistication of the human brain. Computers are linear, moving data back and forth between memory chips and a central processor over a high-speed backbone. The brain, on the other hand, is fully interconnected, with logic and memory intimately cross-linked at billions of times the density and diversity of that found in a modern computer. Neuromorphic chips aim to process information in a fundamentally different way from traditional hardware, mimicking the brain’s architecture to deliver a huge increase in a computer’s thinking and responding power.
Miniaturization has delivered massive increases in conventional computing power over the years, but the bottleneck of shifting data constantly between stored memory and central processors uses large amounts of energy and creates unwanted heat, limiting further improvements. In contrast, neuromorphic chips can be more energy efficient and powerful, combining data-storage and data-processing components into the same interconnected modules. In this sense, the system copies the networked neurons that, in their billions, make up the human brain.
Neuromorphic technology will be the next stage in powerful computing, enabling vastly more rapid processing of data and a better capacity for machine learning. IBM’s million-neuron TrueNorth chip, revealed in prototype in August 2014, has a power efficiency for certain tasks that is hundreds of times superior to a conventional CPU (Central Processing Unit), and more comparable for the first time to the human cortex. With vastly more compute power available for far less energy and volume, neuromorphic chips should allow more intelligent small-scale machines to drive the next stage in miniaturization and artificial intelligence.
Potential applications include: drones better able to process and respond to visual cues, much more powerful and intelligent cameras and smartphones, and data-crunching on a scale that may help unlock the secrets of financial markets or climate forecasting. Computers will be able to anticipate and learn, rather than merely respond in pre-programmed ways.
10. Digital genome
Healthcare for an age when your genetic code is on a USB stick
While the first sequencing of the 3.2 billion base pairs of DNA that make up the human genome took many years and cost tens of millions of dollars, today your genome can be sequenced and digitized in minutes and at the cost of only a few hundred dollars. The results can be delivered to your laptop on a USB stick and easily shared via the internet. This ability to rapidly and cheaply determine our individual unique genetic make-up promises a revolution in more personalized and effective healthcare.
Many of our most intractable health challenges, from heart disease to cancer, have a genetic component. Indeed, cancer is best described as a disease of the genome. With digitization, doctors will be able to make decisions about a patient’s cancer treatment informed by a tumour’s genetic make-up. This new knowledge is also making precision medicine a reality by enabling the development of highly targeted therapies that offer the potential for improved treatment outcomes, especially for patients battling cancer.
Like all personal information, a person’s digital genome will need to be safeguarded for privacy reasons. Personal genomic profiling has already raised challenges, with regard to how people respond to a clearer understanding of their risk of genetic disease, and how others – such as employers or insurance companies – might want to access and use the information. However, the benefits are likely to outweigh the risks, because individualized treatments and targeted therapies can be developed with the potential to be applied across all the many diseases that are driven or assisted by changes in DNA.
This list was compiled by the Meta-Council on Emerging Technologies, who would like to thank: Justine Cassell, Professor, Human-Computer Interaction, Carnegie Mellon University; Paolo Dario, Director, The BioRobotics Institute, Scuola Superiore Sant’Anna, Pisa; Julia Greer, Professor of Materials Science and Mechanics, California Institute of Technology (Caltech); and Jennifer Lewis, Hansjorg Wyss Professor at the Harvard School of Engineering and Applied Sciences, from the Network of Global Agenda Councils; Michael Pellini, President and Chief Executive Officer, Foundation Medicine Inc., from the Technology Pioneers; and William “Red” Whittaker, Professor at Carnegie Mellon University, for their invaluable contributions to the creation of this list.
Feature image: The sun rises over the CN tower and the rest of the skyline in Toronto. REUTERS/Mark Blinch
Trackback from your site.